Welding table GPPH SMART 15 mm on wheels 1500x1480 mm fi28 mm Grid 100x100 mm

Technical data:

• tabletop material: steel S355J2+N
• tabletop thickness: 15 mm
• leg profile: 60×60×4 mm
• maximum table load: 1800 kg
• hole system: Ø28 in a 100×100 mm grid
• side walls: 2 rows of holes, tolerance deviation ±0.35°
• flatness tolerance: ≤ 0.5 mm over the entire tabletop surface
• milled tabletop edges
• milled and chamfered holes
• chamfered holes on the bottom side

SMART 15 is an economical alternative to the PRO table. Both models have a 15 mm thick tabletop, however, PRO provides higher precision (flatness tolerance ≤0.3 mm), stronger legs, and a load capacity of 700 kg per leg. Additionally, PRO is equipped with dense ribbing at approximately 400 mm intervals, which increases stiffness and stability. SMART 15 retains the same tabletop thickness and full functionality but has a simpler design — with a flatness tolerance of ≤0.5 mm, a total load capacity of 1800 kg, and simplified ribbing. As a result, it is lighter and more cost-effective while remaining a reliable solution.