-320x320.png "MMA welding")
krugi-320x320.jpg "Abrasive materials")
| Rated power supply voltage, V | 380/400 |
| Rated current consumption from the mains phase, А | 16,0 … 18,0 |
| Rated welding current (A) | 350 |
| Maximum operating current, A | 450 |
| Operating load factor | 60% |
| Power supply voltage range (V) | ±15% |
| Welding current control range (A) | 16 - 350 |
| Limits of regulation of speed of giving of a wire, m / min. | 2,0 … 16 |
| Diameter of a stick electrode, mm | 1,6-6 |
| Diameter of solid welding wire, mm | 0,6 - 1,4 |
| Number of rollers of the wire feed mechanism | 4 |
| Weight of the coil no more, kg | 15 |
| Pulse modes during welding | MMA: 0,2...500Hz; TIG: 0,2...500Hz; MIG/MAG: 5...500Hz |
| Warranty period, month | 36 |
| «Hot-Start» | Adjustable |
| «Arc-Force» | Adjustable |
| «Anti-Stick» | Auto |
| Idle voltage reduction unit | on/off |
| Idling voltage, V | 12/75 |
| Arc ignition voltage, V | 110 |
| Rated power consumption, kVA | 7,9-8,6 |
| Maximum consumption,power kVA | 11 |
| Cooling | Adaptive |
| Overall dimensions, WxLxH, mm | 310х620х460 |
| Weight, kg | 27,7 |
| Protection rate | IP21 |
The PATON StandardMIG-350 is the device of single-case type of execution intended for semi-automatic welding ("MIG / MAG"), manual arc welding ("MMA"), argon arc welding ("TIG") by a direct current in the environment.
The StandardMIG-350 implements a fully digital control method, which ensures its versatility and extensive capabilities in fine-tuning welding modes. Rated current up to 350A allows to work with any electrodes with a diameter from 1,6 mm to 6 mm (including refractory) and a continuous welding wire with a diameter from 0,6 mm to 1,4 mm.
A separate closed compartment for welding wire increases its protection against dust and other contaminants, and is designed to install coils with wire weighing up to 15 kg. PATON StandardMIG-350 is equipped with a high-quality metal 4-roller wire feed mechanism with a powerful sealed motor, and a universal connector KZ-2 type "EURO" allows you to connect welding torches from a wide range of manufacturers.
The StandardMIG-350, combined with high power and performance, has low weight and dimensions. And thanks to the LCD screens, the device is easy and convenient to configure to solve any problem. MAG and MMA.
The StandardMIG-350 implements a fully digital control method, which ensures its versatility and extensive capabilities in fine-tuning welding modes. Rated current up to 350A allows to work with any electrodes with a diameter from 1,6 mm to 6 mm (including refractory) and a continuous welding wire with a diameter from 0,6 mm to 1,4 mm.
A separate closed compartment for welding wire increases its protection against dust and other contaminants, and is designed to install coils with wire weighing up to 15 kg. PATON StandardMIG-350 is equipped with a high-quality metal 4-roller wire feed mechanism with a powerful sealed motor, and a universal connector KZ-2 type "EURO" allows you to connect welding torches from a wide range of manufacturers.
The StandardMIG-350, combined with high power and performance, has low weight and dimensions. And thanks to the LCD screens, the device is easy and convenient to configure to solve any problem. MAG and MMA.
" />- The welding unit
- The shoulder-carry belt
- Welding semi-automatic torch ABIMIG 305 LW, 5 м.
- PATON™ branded plastic case
- The welding cable 3 m in length with an Abicor Binzel DE2300 electrode holder
- The welding cable 3 m in length with a Abicor Binzel МК300 grounding clamp
- The operation manual
| Rated power supply voltage, V | 380/400 |
| Rated current consumption from the mains phase, А | 16,0 … 18,0 |
| Rated welding current (A) | 350 |
| Maximum operating current, A | 450 |
| Operating load factor | 60% |
| Power supply voltage range (V) | ±15% |
| Welding current control range (A) | 16 - 350 |
| Limits of regulation of speed of giving of a wire, m / min. | 2,0 … 16 |
| Diameter of a stick electrode, mm | 1,6-6 |
| Diameter of solid welding wire, mm | 0,6 - 1,4 |
| Number of rollers of the wire feed mechanism | 4 |
| Weight of the coil no more, kg | 15 |
| Pulse modes during welding | MMA: 0,2...500Hz; TIG: 0,2...500Hz; MIG/MAG: 5...500Hz |
| Warranty period, month | 36 |
| «Hot-Start» | Adjustable |
| «Arc-Force» | Adjustable |
| «Anti-Stick» | Auto |
| Idle voltage reduction unit | on/off |
| Idling voltage, V | 12/75 |
| Arc ignition voltage, V | 110 |
| Rated power consumption, kVA | 7,9-8,6 |
| Maximum consumption,power kVA | 11 |
| Cooling | Adaptive |
| Overall dimensions, WxLxH, mm | 310х620х460 |
| Weight, kg | 27,7 |
| Protection rate | IP21 |
- 44999 грн