Products catalog

PATON™ MultiPRO-270-400V-15-4

Code: 4012392
Code: 4012392
In Stock
  • 35999 грн
Pay in installments
5999 hrn
x 6 month
Rated power supply voltage, V 380/400
Rated welding current (A) 270
Operating load factor 70%
Power supply voltage range (V) 380±15%
Welding current control range (A) 14 - 270
Diameter of a stick electrode, mm 1,6-6
Diameter of solid welding wire, mm 0,6 - 1,4
Rated power consumption, kVA 7,9-8,6
Maximum consumption,power kVA 11
Protection rate IP33
Overall dimensions, WxLxH, mm 360х540х400
Weight, kg 27,2
Warranty period, month 36

The inverter unit PATON MultiPRO-270-15-4 - is a versatile inverter with digital control method, designed for manual arc welding (MMA), TIG and semi-automatic welding (MIG/MAG) in shielding gases and mixtures thereof. MultiPRO-270-15-4 doublecase design allows to disconnect the source from the wire feeder, which greatly improves the mobility and convenience in MMA and TIG modes. 270A rated current is sufficient for any welding electrodes, diameters from 1.6 mm to 6 mm, and a continuous semi-automatic welding wire diameter of 0.6 to 1.2 mm. The device is equipped with a contactless ignition unit (oscillator) in TIG mode and powerful chetyrehrolikovym metal wire feeder canned motor. Universal connector KZ-2 type ""EURO"" provides an opportunity to connect the burner from a wide range of manufacturers.

PATON MultiPRO-270-15-4 is the most complete set of reliable accessories from the German manufacturer ABICOR BINZEL, that allows you to start work in three modes (MMA / TIG / MIG / MAG) immediately after the acquisition. Model MultiPRO-270-15-4, in combination with high power and capacity, has a low weight and dimensions. And thanks to the LCD screen, the device is easy and convenient to set up a solution to any problem.

Complete set
  • The welding unit
  • The welding wire feeding unit (rollers for 0.6 -0.8 mm and 1.0 -1.2 mm)
  • The shoulder-carry belt
  • PATON™ branded corrugated box
  • The semi-automatic ABIMIG A255 LW welding torch with a cable 3 m in length
  • The ABITIG 26 argon-arc torch with a cable 3 m in length
  • The welding cable 3 m in length with an Abicor Binzel DE2300 electrode holder
  • The welding cable 3 m in length with a Abicor Binzel МК300 grounding clamp
  • The quick-release nipple for a gas hose
  • The operation manual