-320x320.png "MMA welding")
krugi-320x320.jpg "Abrasive materials")
| Type of cooling | air cooled |
| Pilot current | 15 - 25 A (max. 27 A) |
| Rating | 110 A (at 60 % DC) 90 A (at 100 % DC) |
| Type of gas | Compressed air |
| Gas flow | около 180 л/хв. |
| Working pressure | 5 - 5.5 bar |
| Air value defined with nozzle size | 1.4 mm |
| Plasma air | approx. 30 l/min. |
| Gas post flow | ≥ 60 s. |
| Soft start air | ≥ 15 l/min. |
| Type of ignition | HF |
| Gas supply | Compressed air both for plasma and cooling gas |
| Ignition voltage | 7 kV |
| Cutting thickness | max. 40 mm at 110 A depending on material to be cut and power source |
Torches in the ABIPLAS® CUT series can be used for plasma cutting with compressed air as the plasma and cooling gas in all common cutting positions.
Thanks to a large selection of plasma nozzles, electrodes and accessory parts, ABICOR BINZEL plasma cutting torches are suitable for individual continual use even under the toughest of conditions. Special torches are available for automated applications.
Preferences
Robust design and optimum cooling guarantee long torch and consumable life
Handle with extended trigger offering increased distance between plasma jet and hand facilitating safer and fatigue free working
Quickly exchangeable consumables (including insulator) – easy handling
Large range of consumables, equipment and accessories – for all cutting tasks
| Type of cooling | air cooled |
| Pilot current | 15 - 25 A (max. 27 A) |
| Rating | 110 A (at 60 % DC) 90 A (at 100 % DC) |
| Type of gas | Compressed air |
| Gas flow | около 180 л/хв. |
| Working pressure | 5 - 5.5 bar |
| Air value defined with nozzle size | 1.4 mm |
| Plasma air | approx. 30 l/min. |
| Gas post flow | ≥ 60 s. |
| Soft start air | ≥ 15 l/min. |
| Type of ignition | HF |
| Gas supply | Compressed air both for plasma and cooling gas |
| Ignition voltage | 7 kV |
| Cutting thickness | max. 40 mm at 110 A depending on material to be cut and power source |
- 12248 грн