Plasma cutting torches

Plasmatron PT-31 4m

Code: 4004747
- Cable length 4 м
- Cooling Air
- Working air pressure 4.5–5.5 bar
- Cutting type Manual air plasma
- Maximum current до 50 А
- Cable cross-section 4 мм²
- Air consumption 120 л/хв
- 1225 грн
Buy in credit

6

6
- Cable length 4 м
- Cooling Air
- Working air pressure 4.5–5.5 bar
- Cutting type Manual air plasma
- Maximum current до 50 А
- Cable cross-section 4 мм²
- Air consumption 120 л/хв
Plasmatron P-80 5m

Code: 4016153
- Cable length 5 м
- Working air pressure 4.5–5.5 bar
- Cutting type Manual air plasma
- Maximum current до 100 А
- Cable cross-section 14 мм²
- Air connection Carving G1/4
- Electrical connector 2-pin (2P)
- Air consumption 150–180 л/хв
- 3982 грн
Buy in credit

6

6
- Cable length 5 м
- Working air pressure 4.5–5.5 bar
- Cutting type Manual air plasma
- Maximum current до 100 А
- Cable cross-section 14 мм²
- Air connection Carving G1/4
- Electrical connector 2-pin (2P)
- Air consumption 150–180 л/хв
Low stock
Plasma Cutting Torch ABIPLAS® CUT 111 HF

Code: 745.0128.1
- Type of cooling air cooled
- Pilot current 15 - 25 A (max. 27 A)
- Rating 110 A (at 60 % DC) 90 A (at 100 % DC)
- Type of gas Compressed air
- Gas flow около 180 л/хв.
- Working pressure 5 - 5.5 bar
- Air value defined with nozzle size 1.4 mm
- Plasma air approx. 30 l/min.
- Gas post flow ≥ 60 s.
- Soft start air ≥ 15 l/min.
- Type of ignition HF
- Gas supply Compressed air both for plasma and cooling gas
- Ignition voltage 7 kV
- Cutting thickness max. 40 mm at 110 A depending on material to be cut and power source
- 16456 грн
Buy in credit

6

6
- Type of cooling air cooled
- Pilot current 15 - 25 A (max. 27 A)
- Rating 110 A (at 60 % DC) 90 A (at 100 % DC)
- Type of gas Compressed air
- Gas flow около 180 л/хв.
- Working pressure 5 - 5.5 bar
- Air value defined with nozzle size 1.4 mm
- Plasma air approx. 30 l/min.
- Gas post flow ≥ 60 s.
- Soft start air ≥ 15 l/min.
- Type of ignition HF
- Gas supply Compressed air both for plasma and cooling gas
- Ignition voltage 7 kV
- Cutting thickness max. 40 mm at 110 A depending on material to be cut and power source
Plasma Cutting Torch ABICUT 75

Code: 748.0124.1
- Type of cooling air cooled
- Pilot current 15 - 22 A (max. 25 A)
- Rating 75 A (at 60 % DC)
- Type of gas Compressed air
- Gas flow около 135 л/хв.
- Working pressure 5 - 5.5 bar
- Air value defined with nozzle size 1.2 mm
- Plasma air approx. 25 l/min.
- Gas post flow ≥ 60 s.
- Soft start air ≥ 12 l/min.
- Type of ignition HF
- Gas supply Compressed air both for plasma and cooling gas
- Ignition voltage 7 kV
- Cutting thickness max. 20 mm at 75 A depending on material to be cut and power source
- 17460 грн
Buy in credit

6

6
- Type of cooling air cooled
- Pilot current 15 - 22 A (max. 25 A)
- Rating 75 A (at 60 % DC)
- Type of gas Compressed air
- Gas flow около 135 л/хв.
- Working pressure 5 - 5.5 bar
- Air value defined with nozzle size 1.2 mm
- Plasma air approx. 25 l/min.
- Gas post flow ≥ 60 s.
- Soft start air ≥ 12 l/min.
- Type of ignition HF
- Gas supply Compressed air both for plasma and cooling gas
- Ignition voltage 7 kV
- Cutting thickness max. 20 mm at 75 A depending on material to be cut and power source