-320x320.jpg "MIG MAG welding")
-320x320.jpg "TIG welding")
-320x320.jpg "HIGH-ALLOYED CORROSION-RESISTANT STEEL")
-320x320.jpg "Surface Electrode")
-320x320.jpg "Electrodes for cast iron and steel")
-320x320.jpg "Welding Carts")
| Optical class | 1/2/1/2 |
| TIG mode | >20A |
| Welding mode | MIG/MAG/TIG/MMA |
| Dimming degree, din | from DIN9 to DIN13 |
| Delay time, sec | 0.1 ~ 1.00 s |
| Viewing area, mm | 93×43 |
| Light filter window size, mm | 110×90×9 mm |
| Battery | CR2032 |
The RHINO GUARDIAN (306) welding helmet is designed to provide reliable face and eye protection during professional welding tasks in MIG/MAG, MMA, and TIG modes (starting from 20 A).
This is an automatic darkening "chameleon" helmet equipped with an auto-darkening filter. Both the sensitivity and the shade level of the filter can be adjusted using the internal control panel.
The filter is supported by independent sensors on each side, ensuring accurate detection of arc start and stop. The helmet is powered by a solar cell with an additional replaceable CR2032 battery.
• helmet with light filter
• protective polycarbonate screens for external and internal protection of the light filter
• headband with soft pad
• Li-Mn battery installed in the filter
• instruction manual
| Optical class | 1/2/1/2 |
| TIG mode | >20A |
| Welding mode | MIG/MAG/TIG/MMA |
| Dimming degree, din | from DIN9 to DIN13 |
| Delay time, sec | 0.1 ~ 1.00 s |
| Viewing area, mm | 93×43 |
| Light filter window size, mm | 110×90×9 mm |
| Battery | CR2032 |
- 800 грн
- 680 грн