Welding mask Tecmen TM16 815L

A welding mask is the basis of human safety and health during welding. Professional welding cannot do without reliable eye protection during work. The mask is a part of the welder's personal protective equipment and is needed to protect the eyes from corneal inflammation, retinal burns, as well as to protect the face and neck from high temperatures, ultraviolet rays, as well as from splashes of molten metal and sparks.

The Tecmen TM16 815L welder's mask with an automatic darkening light filter meets all safety requirements and is designed with comfort and convenience for the welder during work in mind. The helmet body is made of lightweight, yet impact-resistant material. The headband has a built-in locking mechanism. Adjusting the headband to different head shapes allows you to use the mask for long periods of time without discomfort and a feeling of heaviness. These features provide optimal fit comfort and balanced weight distribution on the welder's head.

Four independent sensors are responsible for the start of the auto-darkening light filter. These sensors focus on the welding arcs without any interference from the environment.

Also in the piggy bank of advantages of the TM16 815L welding mask is an external switch between welding and grinding modes. This solution allows you to set the desired operating mode without removing the mask and gloves.

A distinctive feature of the light filter in the mask of this model is the presence of the "DARK" mode ("Dark"). In this mode, the light filter functions exclusively as dark glass and does not provide automatic darkening.

The TM16 815L welding mask from Tecmen is a chameleon mask with an auto-darkening light filter and universal operating modes for performing a variety of tasks. Regardless of whether you are working with an unstable light source or performing precise welding, the "DARK" and "MIX" modes allow you to achieve optimal welding results. Power supply: solar panel and replaceable CR2450 lithium battery.

Characteristics:

• Working surface of the light filter: 94 x 62 mm
• Overall dimensions of the cartridge: 133 x 114 x 9 mm
• Size of the outer protective glass: 133 x 114 x 1.0 mm
• Size of the inner protective glass: 101.8 x 66.5 x 1.0 mm
• Darkening level in non-working state: DIN 3
• Working in TIG welding mode: from 2 A
• Grinding mode: button on the helmet
• Optical class: 1 / 1 / 1 / 1
• True Color: yes
• Number of sensors: 4
• Darkening degree adjustment: DIN 5-9/10 – 14
• Trigger time: 1/25,000 s
• Lighting time: 0.05 / 0.1 / 0.3 / 0.6 / 1.0 s
• On/Off: automatic
• Protection against ultraviolet and infrared rays: DIN16
• Operating temperature: from -5°С to +55°С
• Weight: 520g ± 5%
• Standard DSTU EN175, EN379, ANSI Z87.1, CSA Z84.3, AS/NZS