Welding table GPPH SMART 15 mm on supports 3000x1480 mm fi28 mm Diagonal Grid

Technical data:

• tabletop material: steel S355J2+N
• tabletop thickness: 15 mm
• leg profile: 60×60×4 mm
• maximum table load: 1800 kg
• hole system: Ø28 in diagonal grid
• side walls: 2 rows of holes, deviation tolerance ±0.35°
• flatness tolerance: ≤ 0.5 mm over the entire tabletop surface
• milled tabletop edges
• milled and chamfered holes
• chamfered holes from below

SMART 15 is an economical alternative to the PRO table. Both models have a 15 mm thick tabletop, however PRO offers higher accuracy (flatness tolerance ≤0.3 mm), stronger legs, and a load capacity of 700 kg per leg. Additionally, PRO is equipped with dense ribbing with a pitch of approximately 400 mm, increasing the rigidity and stability of the structure. SMART 15 maintains the same tabletop thickness and full functionality but features a simpler design—with a flatness tolerance of ≤0.5 mm, a total load of 1800 kg, and simplified ribbing. Because of this, it is lighter and more cost-effective while remaining a reliable solution.