Welding Table GPPH SMART 15 mm on Supports 1500x1480 mm fi16 mm Diagonal Grid

Technical data:

• tabletop material: steel S355J2+N
• tabletop thickness: 15 mm
• leg profile: 60×60×4 mm
• maximum table load: 1800 kg
• hole system: Ø16 in diagonal grid
• side panels: 2 rows of holes, tolerance deviation ±0.35°
• flatness tolerance: ≤ 0.5 mm across the entire tabletop surface
• milled tabletop edges
• milled and chamfered holes
• chamfered holes underneath

SMART 15 is an economical alternative to the PRO table. Both models have a 15 mm thick tabletop, but the PRO offers higher precision (flatness tolerance ≤0.3 mm), stronger legs, and a load of 700 kg per leg. Additionally, the PRO has dense ribbing with a pitch of about 400 mm, which increases the rigidity and stability of the construction. The SMART 15 retains the same tabletop thickness and full functionality but is built with a simpler design — with a flatness tolerance ≤0.5 mm, a total load of 1800 kg, and simplified ribbing. This makes it lighter and more cost-effective while remaining a reliable solution.