Welding table GPPH SMART 15 mm on wheels 2000x1000 mm fi28 mm Grid 100x100 mm

Technical data:

• tabletop material: steel S355J2+N
• tabletop thickness: 15 mm
• leg profile: 60×60×4 mm
• maximum table load: 1800 kg
• hole system: Ø28 in a 100×100 mm grid
• side walls: 2 rows of holes, tolerance deviation ±0.35°
• flatness tolerance: ≤ 0.5 mm over the entire tabletop surface
• milled tabletop edges
• milled and chamfered holes
• chamfered holes on the underside

SMART 15 is an economical alternative to the PRO table. Both models have a 15 mm thick tabletop, but the PRO provides higher accuracy (flatness tolerance ≤0.3 mm), stronger legs, and a 700 kg load per leg. Additionally, the PRO is equipped with dense ribbing with a step of approximately 400 mm, which increases rigidity and stability. The SMART 15 retains the same tabletop thickness and full functionality but has a simpler design — with a flatness tolerance ≤0.5 mm, a total load of 1800 kg, and simplified ribbing. Because of this, it is lighter and more cost-effective while remaining a reliable solution.