Welding table GPPH SMART 15 mm on wheels 1500x1480 mm fi28 mm Diagonal Mesh

Technical data:

• tabletop material: steel S355J2+N
• tabletop thickness: 15 mm
• leg profile: 60×60×4 mm
• maximum table load: 1800 kg
• hole system: Ø28 in diagonal mesh
• side walls: 2 rows of holes, deviation tolerance ±0.35°
• flatness tolerance: ≤ 0.5 mm across the entire tabletop surface
• milled tabletop edges
• milled and chamfered holes
• chamfered holes underneath

SMART 15 is an economical alternative to the PRO table. Both models have a 15 mm thick tabletop, but the PRO offers higher accuracy (flatness tolerance ≤0.3 mm), stronger legs, and a load capacity of 700 kg per leg. Additionally, the PRO is equipped with dense ribbing at approximately 400 mm intervals, which increases the rigidity and stability of the structure. SMART 15 retains the same tabletop thickness and full functionality but has a simpler design — with a flatness tolerance of ≤0.5 mm, a total load capacity of 1800 kg, and simplified ribbing. Because of this, it is lighter and more cost-effective while remaining a reliable solution.