Welding table GPPH SMART 15 mm on wheels 2000x1000 mm fi28 mm Diagonal Grid

Technical data:

• top material: steel S355J2+N
• top thickness: 15 mm
• leg profile: 60×60×4 mm
• maximum table load: 1800 kg
• hole system: Ø28 in diagonal grid
• side walls: 2 rows of holes, deviation tolerance ±0.35°
• flatness tolerance: ≤ 0.5 mm across the entire table surface
• milled edges of the top
• milled and chamfered holes
• chamfered holes underneath

SMART 15 is an economical alternative to the PRO table. Both models have a 15 mm thick top, but the PRO offers higher precision (flatness tolerance ≤0.3 mm), stronger legs, and a load capacity of 700 kg per leg. Additionally, the PRO is equipped with tight ribbing at approximately 400 mm intervals, which increases the stiffness and stability of the structure. SMART 15 retains the same top thickness and full functionality but has a simpler design — with a flatness tolerance ≤0.5 mm, total load capacity of 1800 kg, and simplified ribbing. Because of this, it is lighter and more cost-effective while remaining a reliable solution.