-320x320.jpg "MIG MAG welding")
-320x320.jpg "TIG welding")
-320x320.jpg "HIGH-ALLOYED CORROSION-RESISTANT STEEL")
-320x320.jpg "Surface Electrode")
-320x320.jpg "Electrodes for cast iron and steel")
-320x320.jpg "Welding Carts")
Specification
| Cable length | 7,5 m |
| TCS | 13 pin |
| Duty cycle | 40 А/100% PA |
| Operating temperature | від -10°C до 40°C |
| Working pressure | 4,5 bar |
| Gas speed | 120 l/min |
| Weight | 1,5 kg |
| Bikox cable | Bikox |
Show all specifications
Description
FHT-EX®40H (manual type «Hand Torch») – version without consumables and with a cable length of 7,5 m, TCS13 connector.
Connection connector: TCS13 system (Thermacut Torch Connection System) — allows for quick torch replacement.
Designed for use with the EX‑TRAFIRE 40SD series source (pneumatic — air-plasma cutting).
Designed for manual plasma cutting of sheet metal.
Advantages:
- Ergonomic shape of the hand torch, designed to reduce operator fatigue.
- Compact and flexible design with flexible coaxial cable — convenient for working in confined or hard-to-reach positions
- High service life: can operate at 100% load (duty cycle) at a current of ~25 A.
- Maximum piercing (piercing) up to ~10 mm.
- Recommended for sheets up to ~15 mm thick and more with good power reserve.
- Design with quick and tool-free replacement of consumables.
Complete set
- Supplied without consumables (nozzle, electrode, etc.) - these elements are purchased separately.
- When ordering, pay attention to the cable length (4 m, 5 m, 7.5 m, 15 m options)
- The TCS13 connector ensures compatibility with sources with the appropriate interface.
Testimonials
Specification
| Cable length | 7,5 m |
| TCS | 13 pin |
| Duty cycle | 40 А/100% PA |
| Operating temperature | від -10°C до 40°C |
| Working pressure | 4,5 bar |
| Gas speed | 120 l/min |
| Weight | 1,5 kg |
| Bikox cable | Bikox |
Manual cutter FHT-EX®40H without consumables 7,5 m /TCS13
Code: EX-2-131-005
In Stock
- 15943 грн