-320x320.jpg "MIG MAG welding")
-320x320.jpg "TIG welding")
-320x320.jpg "HIGH-ALLOYED CORROSION-RESISTANT STEEL")
-320x320.jpg "Surface Electrode")
-320x320.jpg "Electrodes for cast iron and steel")
-320x320.jpg "Welding Carts")
New PATON StandardCUT-40 plasma cutter
Published:
25/04/2024
Introducing the new PATON StandardCUT-40 plasma cutter, which is designed for cutting metals and alloys up to 12 mm thick with a plasma arc in an air stream.
PATON StandardCUT-40 is suitable for use in private and professional workshops. It is powered by a standard single-phase 220V network and is equipped with a plasma torch with a 4-meter hose and a welding cable with a “ground” terminal from ABICOR BINZEL.
This machine is characterized by affordability, ease of setup and use, reliability and small dimensions.
Products
-
Code: 1063004012- 22499 грн24999 грн
66
- Rated input current from the mains, A 27
- Rated cutting current, A 40
- Maximum cutting thickness of metal, mm 12
- Recommended thickness of metal cut, mm 8
- Non-contact ignition unit (oscillator) +
- Rated power supply voltage, V 220/230
- Operating load factor 50%
- Power supply voltage range (V) 190-250
- Operating air pressure range, MРa 0,4 - 0,6
- Welding current control range (A) 20 - 40
- Gas flow, l / min not less than 180
- Pilot arc -
- Warranty period, month 12
- Idling voltage, V 270-310
- Rated power consumption, kVA 4,9
- Maximum consumption,power kVA 6,3
- Efficiency, % 90
- Cooling forced
- Overall dimensions, WxLxH, mm 193х465х292
- Weight, kg 10,3
- Protection rate IP23