Rated power supply voltage, V | 380/400 |
Rated current consumption from the mains phase, А | 30 ... 35,5 |
Rated welding current (A) | 500 |
Maximum operating current, A | 630 |
Operating load factor | 70% |
Power supply voltage range (V) | ±15% |
Welding current control range (A) | 16 - 500 |
Diameter of a stick electrode, mm | 1,6-8 |
Diameter of solid welding wire, mm | 0,6 - 1,6 |
Pulse modes during welding | MMA / TIG |
Warranty period, month | 24 |
«Hot-Start» | Adjustable |
«Arc-Force» | Adjustable |
«Anti-Stick» | Auto |
Idle voltage reduction unit | on/off |
Idling voltage, V | 12/75 |
Arc ignition voltage, V | 110 |
Rated power consumption, kVA | 19,9-23,6 |
Maximum consumption,power kVA | 29 |
Cooling | Adaptive |
Weight, kg | 36,7 |
Protection rate | IP23 |
Inverter digital semi-automatic PATON ProMIG-500-15-4 W is a device for professional use, designed for semi-automatic welding (MIG/MAG), manual arc welding (MMA), TIG DC, permanent shaking The device ProMIG-500-15-4 W implemented a fully digital method of control, due to which its multifunctionality and wide possibilities in precise adjustment of welding modes are ensured. Increased load duration on the nominal current up to 500А, allows working with any electrodes with a diameter from 1.6 mm to refractory 6 mm, as well as semi-automatic welding with a solid wire with a diameter from 0.6 to 1.6 mm. Thanks to two-hull execution, the current source can be easily separated from the wire supply unit, which significantly increases the mobility and convenience of operation in MMA and TIG modes. The welding semi-automatic machine is equipped with two more connectors for connecting a liquid cooling hose and a cable with power contacts.
PATON ProMIG-500-15-4 W is equipped with a high-quality metal 4-roller wire feeding mechanism with a powerful sealed engine, and a universal connector of KZ-2 type "EURO" allows you to connect welding burners from a wide range of manufacturers. Powerful bracket for welding wire allows you to install coils weighing up to 15 kg. The ProMIG-500-15-4 W model, combined with high power and performance, has a small weight and overall dimensions. And thanks to LCD screens, the device is easy and convenient to configure to solve any problem.
- The welding unit
- WIre feed mechanism15-4 500 PRO W
- Copper cable (5 m) with ABICOR BINZEL (ground) terminal
- Roll kits for 4 steel wire diameters and 2 aluminum wire diameters
- Gas hose quick-disconnect fitting
- Operation manual
- PATON™ branded carton box
Rated power supply voltage, V | 380/400 |
Rated current consumption from the mains phase, А | 30 ... 35,5 |
Rated welding current (A) | 500 |
Maximum operating current, A | 630 |
Operating load factor | 70% |
Power supply voltage range (V) | ±15% |
Welding current control range (A) | 16 - 500 |
Diameter of a stick electrode, mm | 1,6-8 |
Diameter of solid welding wire, mm | 0,6 - 1,6 |
Pulse modes during welding | MMA / TIG |
Warranty period, month | 24 |
«Hot-Start» | Adjustable |
«Arc-Force» | Adjustable |
«Anti-Stick» | Auto |
Idle voltage reduction unit | on/off |
Idling voltage, V | 12/75 |
Arc ignition voltage, V | 110 |
Rated power consumption, kVA | 19,9-23,6 |
Maximum consumption,power kVA | 29 |
Cooling | Adaptive |
Weight, kg | 36,7 |
Protection rate | IP23 |
- 64999 грн