Т-590
PATON Т-590 diameter 4mm, weight packs 5kg
PATON Т-590 diameter 4mm, weight packs 5kg
PATON Т-590 diameter 5mm, weight packs 5kg
Price on request
Price on request
Type of coating: basic
Э-320Х25С2ГР-Т-590-d-НГ
Е-700/59-1-П40
ГОСТ 9466-75
ТUU 05447444.004-97
Electrodes for welding of welduping details of machines from stell and cast iron that working in the abrasive wear conditions.
Current type:
- alternating current from the transformer with open circuit voltage (more 70 V).
- direct current polarity.
The chemical composition of metal:
| С Carbon | Si Silicon | Mn Manganese | S Sulfur | P Phosphorus |
| 2,9-3,5 | 22.0-27.0 | 0.5-1.5 | 2,0-2,5 | 0,3-1,5 |
Recommendations:
| Electrodes “Т-590” are very suitable for welduping of quickweared surfaces operating in an abrasive environment, and also wherein high hardness is required. Without heat treatment electrodes “Т-590” allow to get the less plastic metal bead, but with hardness of HRC 58-64. Such hardness is a result of special alloying elements added in coverage. Moist electrodes may be reconditioned at 300-350°С for 1 hr.. |
Welding conditions:
| Welding positions | Electrode diameter (mm) | |
| Ø4,0 | ø 5,0 | |
| Welding current | ||
| Lower/vertical | 200-220 | 250-280 |
Packing data:
| Diameter, mm | Length, mm | weight packs, kg |
| 4.0 | 350 | 5 |
| 5.0 | 350 | 5 |
Analogues:
| ASKAYNAK | AS SD-ABRA Сг |
| ESAB | ОК 84.78 |
| Varis | AV1 AP 63, AV APL600 |
| LEZ | LEZ Т-590 |
| The position of the welding seams |
 |