PATON PRO-270-400V DC MMA/TIG/MG/MAG
Price on request

ADVANTAGES

  • Hot Start
  • Arc Force
  • Antistick
  • 3-YEAR WARRANTY
  • FREE SHIPPING
  • PAYMENT UPON RECEIPT

DELIVERY SET

  • The welding unit
  • The shoulder-carry belt
  • Paton branded plastic case
  • The welding cable 3 m in length with an Abicor Binzel DE2300 electrode holder
  • The welding cable 3 m in length with a Abicor Binzel МК300 grounding clamp
  • The operation manual

The inverter-rectifier welding units MMA of the PROFESSIONAL series are designed for direct- current gas-shielded manual arc welding (MMA), argon-arc welding (TIG) and semi-automatic welding (MIG/MAG) as welding units with an external wire feeding unit. These welding units are designed for industry application. Due to the availability of additional adjustments, it is possible to set the optimal values of the unit parameters in various operating modes. The units ensure virtually continuous operation at rated currents 160 A, 200 A and 250 A. These currents are sufficient for manual arc welding with any electrodes from electrodes 1.6 mm in diameter through low-melting electrodes 6.0 mm in diameter, and for semi-automatic arc welding with solid welding wire 0.6 … 1.2 mm in diameter. The parameters of the welding unit are preset as optimal for the most operation modes. The more complex adjustment is possible, if required, provided that the welder has corresponding knowledge and experience. The welding units contains a module for protection against power supply overvoltage and undervoltage.

CHARACTERISTIC FEATURES AND ADVANTAGES
  • The possibility to control welding parameters in a wide range:
    • In the ММА process: 1 basic parameter + 10 additional parameters
    • In the TIG process: 1 basic parameter + 4 additional parameters
    • In the MIG/MAG process: 1 basic parameter + 5 additional parameters
  • The availability of the adjustable pulse welding mode for all the welding processes.
 ParameterPATON PRO-270-400V
Rated power supply voltage, 50 Hz (V)3х380 3х400
Rated consumed current (A)16,0 … 18,0
Rated welding current (A)350
Maximum welding current (A)450
Operating load factor70%/при 350А 100%/при 290A
Power supply voltage range (V)±15%
Welding current control range (A)16 – 350
Hot StartAdjustable
Arc ForceAdjustable
AntistickAutomatic
Open-circuit voltage (V)12/75
Arc-starting voltage (V)110
Rated consumed power (kVA)10,5 … 11,8
Maximum consumed power (kVA)15
Efficiency coefficient (%)90
CoolingForced
Overall dimensions (length x width x height) (mm)388 х 144 х 332
Weight (kg)10,9
Subscribe to our newsletter
to always be informed about the news of the Plant
Close
Request a price on:
×