Price on request


  • Hot Start
  • Arc Force
  • Antistick


  • The welding unit
  • The welding wire feeding unit (rollers for 0.6 -0.8 mm and 1.0 -1.2 mm)
  • The shoulder-carry belt
  • Paton branded corrugated box
  • The semi-automatic ABIMIG A255 LW welding torch with a cable 3 m in length
  • The welding cable 3 m in length with an Abicor Binzel DE2300 electrode holder
  • The welding cable 3 m in length with a Abicor Binzel МК300 grounding clamp
  • The quick-release nipple for a gas hose
  • The operation manual

The digitally-controlled inverter-rectifier semi-automatic welding units MIG/MAG of the PROFESSIONAL series are designed for direct-current gas-shielded welding according to such welding processes as a manual arc welding process (MMA), argon-arc welding process (TIG), and a semi-automatic arc welding process (MIG/MAG). These welding units of the PROFESSIONAL series are designed for industrial use. The welding unit can be used separately from the welding wire feeding unit in order to provide the ease of operation of the welding unit and provide the compliance of the unit with safety requirements. The units are rated for operation with an optimal operating load factor at rated currents 200 A and 250 A, correspondingly, in operation from a 220 V single-phase power supply system. These currents are sufficient for welding with any electrodes in the range from electrodes 1.6 mm in diameter through low-melting electrodes 6.0 mm in diameter (for MIG/MAG-250P), and for semi-automatic arc welding with solid welding wire 0.6 … 1.2 mm in diameter (for MIG/MAG-200P).

  • The possibility to control welding parameters in a wide range:
    • In the ММА process: 1 basic parameter + 10 additional parameters
    • In the TIG process: 1 basic parameter + 8 additional parameters
    • In the MIG/MAG process: 2 basic parameters + 4 additional parameters
  • The availability of the adjustable pulse welding mode for all the welding processes.
  • The microelectronic elements of the welding unit are installed in a special compartment.

The function of open-circuit voltage reduction in the manual arc welding process (MMA), with the possibility for this function to be switched on and off, allows the welding unit to be operated in unsafe environment. The characteristic feature of the semi-automatic welding units of the STANDARD series is that every unit contains a high-power, reliable, and airtight welding wire feeding unit.

Номинальное напряжение питающей сети 50Гц, В220
Номинальный потребляемый ток из сети, А32…36
Номинальный сварочный ток, А250
Максимальный действующий ток, А335
Продолжительность нагрузки (ПН)70%/250А
Пределы изменения напряжения питающей сети, В160-260
Пределы регулирования сварочного тока, А12-250
Пределы регулирования сварочного напряжения, В12-28
Диаметр штучного электрода, мм1,6-6,0
Диаметр сварочной проволоки, мм0,6-1,2
Импульсные режимы при сваркеMMA/TIG/MIG/MAG
Горячий старт «Hot-Start» в режиме РДСрегулиров.
Форсаж дуги «Arc-Force» в режиме  РДСрегулиров.
Антиприлипание «Anti-Stick» в режиме РДСавтомат.
Блок снижения напряжения холостого ходавкл/выкл
Напряжение холостого хода РДС, В12/75
Напряжение поджига дуги, В110
Номинальная потребляемая мощность, кВА6,9…7,9
Максимальная потребляемая мощность, кВА11,0
КПД, %90
Диапазон рабочих температур-25…+45°С
Габаритные размеры, ДхШхВ, мм450х275х290
Масса без катушки и аксессуаров, кг12,7
Класс защиты*ІР33
Subscribe to our newsletter
to always be informed about the news of the Plant
Request a price on: