_1_slnew.jpg)
_2new.jpg)
ADVANTAGES
- Hot Start
- Arc Force
- Antistick
- WARRANTY 5 YEARS
- FREE SHIPPING
- PAYMENT ON RECEIPT
ACCESSORIES INCLUDED
- Welding machine
- Branded corrugated box PATON™
- Welding torch Abicor Binzel ABIMIG 245
- Electrode holder Abicor Binzel DE2200
- Earth terminal Abicor Binzel MK300
- Roll kits for 4 wire diameters
- Gas hose quick coupling
- User's manual
Operation manual (PDF)The digitally-controlled one-body inverter-rectifier semi-automatic welding units MIG/MAG of the STANDARD series are designed for direct-current gas-shielded welding according to such welding processes as a manual arc welding process (MMA), argon-arc welding process (TIG), and semi-automatic arc welding process (MIG/MAG). The units are intended for residential and subcommercial use. The welding units are rated for operation with an optimal operating load factor at rated currents 150 A, 200 A, and 250 A, correspondingly, in operation from a 220 V single-phase power supply system. These currents are sufficient for welding with any electrodes in the range from electrodes 1.6 mm in diameter through low-melting electrodes 6.0 mm in diameter (for MIG/MAG- 250S), and for semi-automatic arc welding with solid welding wire 0.6 … 1.2 mm in diameter (for MIG/MAG-250S).
- The possibility to control welding parameters in a wide range:
- In the ММА process: 1 basic parameter + 10 additional parameters
- In the TIG process: 1 basic parameter + 4 additional parameters
- In the MIG/MAG process : 2 basic parameters + 4 additional parameters
- The availability of the adjustable pulse welding mode for all the welding processes.
- The microelectronic elements of the unit are installed in a special compartment.
The parameters of the welding unit are preset as optimal for the most operation modes. The more complex adjustment is possible, if required, provided that the welder has corresponding knowledge and experience. The characteristic feature of the semi-automatic welding units of the STANDARD series is that every unit contains a high-power, reliable, and airtight welding wire feeding unit.
| Parameter | PSI-250S(5-2) |
| Rated power supply voltage, 50 Hz (V) | 220 |
| Rated consumed current (A) | 32 … 36 |
| Rated welding current (A) | 250 |
| Maximum welding current (A) | 335 |
| Operating load factor | 45%/250А 100%/167A |
| Power supply voltage control range (V) | 160 ... 260 |
| Welding current control range (A) | 12 ... 250 |
| Welding voltage control range (V) | 12 ... 28 |
| Welding wire feed speed control range (m/min) | 2.0 ... 16 |
| Welding wire diameter (mm) | 0.6 ... 1.2 |
| Weight of a wire coil, not more than (kg) | 5 |
| Pulse modes in welding | MMA/TIG/MIG/MAG |
| Increased-current arc starting function (Hot Start) | Adjustable |
| Reduced-voltage welding function (Arc Forcing) | Adjustable |
| Protection against electrode sticking (Antisticking) | Automatic |
| Reduction of open-circuit voltage function | On/Off |
| Open-circuit voltage in manual arc welding (V) | 12/75 |
| Arc starting voltage (V) | 110 |
| Rated consumed power (kVA) | 6.9 … 7..9 |
| Maximum consumed power (kVA) | 11.0 |
| Efficiency coefficient (%) | 90 |
| Cooling | Forced |
| Operating temperature range | –25 … +45 °С |
| Overall dimensions (length x width x height) (mm) | 420x245x298 |
| Weight without a wire coil and accessories | 11.5 |
| Protection class | IP21 |