PATON StandardMIG-200 DC MIG/MAG/MMA/TIG
Price on request

ADVANTAGES

  • Hot Start
  • Arc Force
  • Antistick
  • WARRANTY 5 YEARS
  • FREE SHIPPING
  • PAYMENT ON RECEIPT

ACCESSORIES INCLUDED

  • Welding machine
  • Branded corrugated box PATON™
  • Welding torch Abicor Binzel ABIMIG 145
  • Electrode holder Abicor Binzel DE2200
  • Earth terminal Abicor Binzel MK300
  • Roll kits for 4 wire diameters
  • Gas hose quick coupling
  • User's manual

The digitally-controlled one-body inverter-rectifier semi-automatic welding units MIG/MAG of the STANDARD series are designed for direct-current gas-shielded welding according to such welding processes as a manual arc welding process (MMA), argon-arc welding process (TIG), and semi-automatic arc welding process (MIG/MAG). The units are intended for residential and subcommercial use. The welding units are rated for operation with an optimal operating load factor at rated currents 150 A, 200 A, and 250 A, correspondingly, in operation from a 220 V single-phase power supply system. These currents are sufficient for welding with any electrodes in the range from electrodes 1.6 mm in diameter through low-melting electrodes 6.0 mm in diameter (for MIG/MAG- 250S), and for semi-automatic arc welding with solid welding wire 0.6 … 1.2 mm in diameter (for MIG/MAG-250S).

CHARACTERISTIC FEATURES AND ADVANTAGES
  • The possibility to control welding parameters in a wide range:
    • In the ММА process: 1 basic parameter + 10 additional parameters
    • In the TIG process: 1 basic parameter + 4 additional parameters
    • In the MIG/MAG process : 2 basic parameters + 4 additional parameters
  • The availability of the adjustable pulse welding mode for all the welding processes.
  • The microelectronic elements of the unit are installed in a special compartment.

The parameters of the welding unit are preset as optimal for the most operation modes. The more complex adjustment is possible, if required, provided that the welder has corresponding knowledge and experience. The characteristic feature of the semi-automatic welding units of the STANDARD series is that every unit contains a high-power, reliable, and airtight welding wire feeding unit.

ParameterPSI-200S(5-2)
Rated power supply voltage, 50 Hz (V)220
Rated consumed current (A)25 … 28
Rated welding current (A)200
Maximum welding current (A)270
Operating load factor45%/200А
100%/134A
Power supply voltage control range (V)160 ... 260
Welding current control range (A)10 ... 200
Welding voltage control range (V)12 ... 28
Welding wire feed speed control range (m/min)2.0 ... 16
Welding wire diameter (mm)0.6 ... 1.0
Weight of a wire coil, not more than (kg)5
Pulse modes in weldingMMA/TIG/MIG/MAG
Increased-current arc starting function (Hot Start)Adjustable
Reduced-voltage welding function (Arc Forcing)Adjustable
Protection against electrode sticking (Antisticking)Automatic
Reduction of open-circuit voltage functionOn/Off
Open-circuit voltage in manual arc welding (V)12/75
Arc starting voltage (V)110
Rated consumed power (kVA)5.5 … 6.1
Maximum consumed power (kVA)8.0
Efficiency coefficient (%)90
CoolingForced
Operating temperature range–25 … +45 °С
Overall dimensions (length x width x height) (mm)420x245x298
Weight without a wire coil and accessories11.2
Protection classIP21
Subscribe to our newsletter
to always be informed about the news of the Plant
Close
Request a price on:
×