PATON MultiPRO-250-15-4 DC MMA/TIG/MIG/MAG
Price on request

ADVANTAGES

  • Hot Start
  • Arc Force
  • Antistick
  • WARRANTY 3 YEARS
  • FREE SHIPPING
  • PAYMENT ON RECEIPT

ACCESSORIES INCLUDED

  • The welding unit
  • The welding wire feeding unit (rollers for 0.6 -0.8 mm and 1.0 -1.2 mm)
  • The shoulder-carry belt
  • Paton branded corrugated b
  • The semi-automatic ABIMIG A255 LW welding torch with a cable 3 m in length
  • The ABITIG 26 argon-arc torch with a cable 3 m in length
  • The welding cable 3 m in length with an Abicor Binzel DE2300 electrode holder
  • The welding cable 3 m in length with a Abicor Binzel МК300 grounding clamp
  • The quick-release nipple for a gas hose
  • The operation manual

Multifunctional digital inverters PATON ™ MFI MultiPRO of the "Professional" series is the most advanced and versatile welding inverter devices in the PATON ™ line that are designed for industrial use and equipped with all the necessary accessories for comfortable operation in manual arc welding modes (MMA), argon-arc welding (TIG) and semi-automatic welding (MIG/MAG) in the environment of protective gases and mixtures with direct current. MFI -Р MultiPRO are rated for operation with an optimal operating load factor at rated current, in operation from a 220 V single-phase power supply system or a 380 V three-phase power supply system. These currents are sufficient for welding with any electrodes in the range from electrodes 1.6 mm in diameter through low-melting electrodes 6.0 mm in diameter, and for semi-automatic arc welding with solid welding wire 0.6 … 1.4 mm in diameter.  For convenience of use, the source of the welding current can be separated from the wire feeder, and also used separately in the MMA mode, which greatly reduces its weight and size characteristics. The unit PATON™ MFI-250P MultiPRO is equipped with a powerful and high-quality four-roll wire feeder.

ADVANTAGES
  • The possibility to control welding parameters in a wide range:
    • In the ММА process: 1 basic parameter + 10 additional parameters
    • In the TIG process: 1 basic parameter +10 additional parameters
    • In the MIG/MAG process : 2 basic parameters + 8 additional parameters
  • The availability of the adjustable pulse welding mode for all the welding processes;
  • In the argon-arc welding mode, the arc ignition is carried out either by the TIG-LIFT method or by contactless using an oscillator;
  • Separation of the source from the wire feeder;
  • All accessories necessary for operation in all welding modes are present in the standard kit.
PARAMETERMFI-250P MultiPRO
Rated power supply voltage, 50 Hz (V)220
Rated consumed current (A)32…36
Rated welding current (A)250
Maximum welding current (A)335
Operating load factor70%/250A 
100%/208A
Power supply voltage control range (V)160-260
Welding current control range (A)12-250
Welding voltage control range (V)12-28
Stick welding electrode diameter (mm)1,6-6,0
Welding wire diameter (mm)0,6 – 1,2
Pulse modes in weldingMMA/TIG/MIG/MAG
Increased-current arc starting function (Hot Start)Adjustable
Reduced-voltage welding function (Arc Forcing)Adjustable
Protection against electrode sticking (Antisticking)Automatic
Reduction of open-circuit voltageOn/Off
Open-circuit voltage in the manual welding mode12/70
Arc starting voltage (V)110
Rated consumed power (kVA)6.9 … 7.7
Maximum consumed power (kVA)11
Efficiency coefficient (%)90
Cooling  Adaptive
Operating temperature range–25 … +45°С
Overall dimensions (length x width x height) (mm)360х260х270
Weight without a wire coil and accessories10,7
Protection classIP33
Subscribe to our newsletter
to always be informed about the news of the Plant
Close
Request a price on:
×